Ghost Immobiliser Fitting
Secure your vehicle from key theft, cloning, and hacking by using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser to give you notifications when your vehicle is taken or damaged.
The installation of an Ghost immobiliser can be done by a certified technician. It is essential to have the proper equipment and heat shrink tubing.
Getting Started
In contrast to physical security devices such as wheel locks or car alarms, ghost immobilisers guard your vehicle without the need of key fobs or LED indicators. Instead they connect directly to the ECU's CAN data network. They will only start after entering a PIN sequence. This gives a greater level of security against key hacking, ECU swapping and cloning.
Installing a ghost immobiliser Birmingham requires a certain amount of agility and precision. It can be a bit like navigating a minefield; one misstep can cause serious damage to the circuits of the electrical system of your vehicle. It is important to understand the installation procedure and prepare your vehicle correctly.
It is necessary to remove interior panels from the vehicle to make space for the immobiliser. Once you've found the perfect location to hide it and secure it with cable ties to keep it from being removed or tampered with. Then, tidy up your wiring by tying loose wires down and using insulation tape to cover exposed connections. This reduces the chance of an accidental short circuit and improve the appearance and reducing the chance of theft.
Finally, identify a source of continuous 12V power and an earthing point for the ghost immobiliser. Once you've located them check the power cables using a multimeter. Connect the CAN H & CAN L wires of the immobiliser with the grounding and power sources.
Once ghost immobiliser price 've made all of the necessary connections It is important to check the connections and check the immobiliser for signs of corrosion or other damage. It is also important to test the system to ensure it's working correctly by entering a PIN code and then starting the engine. This should be an ongoing part of your routine, as it will help to detect any issues that might be intermittent early on. Regular testing can help to prolong the life of the device and ensure it's operating at peak performance.
Preparing the Vehicle
The installation of an Ghost immobiliser can be a difficult job that requires the appropriate tools and expertise. A wiring diagram of the vehicle is vital for locating the correct wires and making precise connections. A multimeter is a great tool to check the electrical properties and ensure safety. Insulation tape and cable tie can be used to secure connections and shield them from being tampered with. A user's manual is provided for your Ghost Immobiliser. It will provide you with specific instructions specifically tailored to the model.
Once installed, a ghost immobiliser is able to prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence using buttons on the steering wheel or on the centre console. The code can be changed at any time by the owner, either manually or remotely via an app for mobile devices. The device also functions quietly and is undetectable to thieves as it doesn't emit radio frequency.
A ghost immobiliser connects directly to the vehicle's CAN bus, which is a network that connects to all the electronic control units (ECUs). It intercepts signals sent by the ECUs and prevents the engine from starting when a false signal is detected. The system is weatherproof and tamper-proof. It has no keys or LED indicators that could attract thieves' attention.
It can be mounted behind or in a less noticeable area so that it's not easily spotted by thieves and won't hinder vehicle's performance. It can even be mounted in a small box and makes it less likely to be discovered during a test drive by unscrupulous salespeople for cars.
Its stealthy operation and integration with the vehicle's CAN bus network make it a powerful deterrent to modern methods of theft, like key cloning and signal relay attacks. Combining the system with other security measures will create a powerful barrier that can deter even the most persistent of thieves. This is the reason why more insurance companies are recommending or even requiring ghost immobilisers be installed, since it will significantly lower monthly premiums.
Making the Connections
Ghost immobilisers are completely silent, unlike traditional security systems that can be heard by thieves. They stop thieves from knowing that your vehicle is on. They also prevent high-tech methods of stealing vehicles, such as OBD hacking. Installing them without leaving permanent marks on your car is an excellent alternative for those planning to sell their vehicle in the near-future.
The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable solutions to prevent car theft. It makes use of the CAN data network to disable your engine and generates a PIN code that only you know, meaning it is difficult for thieves to detect. It is compatible with a wide range of vehicles, and it works with many features already installed including car alarms, steering wheel locks, GPS trackers and door lock bypass.
If you choose to install a Ghost immobiliser, be sure to refer to the wiring diagram of your specific car model to identify the wires that require connecting. Double-check their locations to make sure they are accurate, and label them or tape them to help you remember them. You'll also need to locate a source of continuous power (12V) and a grounding point for the system. Once you have these in place, you can begin to make the connections needed to complete the installation.
When the ghost immobiliser is connected to the CAN bus, it will block your vehicle from starting until you enter a pin number using the buttons on the steering wheel or dashboard. This will stop ECU replication and other methods of theft of vehicles. In addition, it could be combined with other Thatcham-approved security accessories, such as alarms and tyre clamps to give your car an additional level of protection.
As the UK automotive aftermarket market continues to grow as do the options to secure your vehicle. There are a myriad of ways for thieves to gain access into your car and take it, which is why it's crucial to do all you can to ensure that it isn't stolen. Ghost immobilisers have become a popular choice among car owners who are accountable.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU and prevent the engine from running until a specific PIN code is entered. This makes it very difficult for thieves to steal the key fob of your car and start your car, and more difficult to disable the system through hacking into its electronics.
Ghost Immobilisers are also able to be utilized together with GPS tracking devices, which can help you track your vehicle and locate it in the event of theft. This feature is not commonly found in security products that are sold aftermarket, but it is an excellent way to improve your vehicle's security, and give you peace of mind.
In addition to providing increased security, in addition to providing enhanced security, the Ghost-II immobiliser provides a simple user experience by removing the requirement for additional key fobs and devices. It features a simple, user-friendly PIN code entry that can be integrated seamlessly with your everyday routine. It also offers options for deactivation and features that allow you to temporarily disable the immobiliser valet parking or servicing.
Before beginning the installation process, be familiar with your vehicle's wiring and prepare the required tools. A basic set of hand tools will give you the ability to create precise connections, while a multimeter can help determine electrical values. Insulation tape and heat-shrink tubing are vital to protect connections from short circuits. Cable ties can be used to secure wiring. It's also important to work in a space that is well-lit, and wear protective gear when working with electrical tools and components.
After you've completed the installation, you should test the Ghost immobiliser to verify that it's functioning properly. First, you should try to start the vehicle without entering the PIN code. If this fails then you'll need to retest and inspect the connections more thoroughly.
The Ghost Immobiliser, unlike other security systems is a covert device which cannot be recognized by thieves. It is also far more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA-approved and endorsed by some insurance companies. ghost immobiliser price makes it a cost-effective investment that provides you with the peace of mind you deserve.